Description
Philips UV-C Batten TMS160C 1x36W TUV SLV/6
The Philips TMS160C UV-C batten is a ready-to-wire surface disinfection fitting supplied complete with a Philips TUV T8 36W lamp and a high frequency electronic ballast. It is designed for the disinfection of surfaces across a wide range of professional applications.
The open batten gives broad, even UV-C irradiance. The level of disinfection achieved depends on lamp output, the distance to the surface and the exposure time. A highly reflective aluminium body directs more UV-C towards the surfaces being treated, and the lamp holders and end caps are shielded against UV-C to protect them over time.
Key features
- Complete fitting: batten, HF electronic ballast and Philips TUV T8 36W lamp included
- UV-C peak at 253.7 nm
- Highly reflective, durable aluminium body
- UV-C shielded lamp holders and end caps
- Surface or suspended mounting
- Single-lamp bare batten version (no reflector, no sensor)
Typical applications
- Unoccupied-room surface disinfection in commercial, industrial and food handling areas
- Storage rooms, plant rooms, cool rooms and production areas treated out of hours
- A component for purpose-built UV-C disinfection enclosures and systems
Specifications
| Product name | TMS160C 1X36W TUV SLV/6 |
| Philips order code | 911401524471 |
| Lamp included | 1 x Philips TUV T8 36W (G13 base) |
| Input voltage | 220–240 V, 50/60 Hz |
| Power consumption | 36 W |
| Gear | HF Performer electronic ballast |
| UV-C radiation | 14 W |
| UV-C irradiance at 0.2 m | 57.6 µW/cm² |
| Peak wavelength | 253.7 nm |
| Dimensions (L x W x H) | 1230 x 56 x 80 mm |
| Net weight | Approx. 1.1 kg |
| Housing | Steel body with aluminium reflective surface |
| Connection | 3-pole screw terminal block |
| Protection | IP20, IK02, Safety Class I |
| Photobiological risk | Risk Group 3 at 200 mm |
| Dimmable | No |
| Manufacturer warranty | 1 year |
Datasheet: Philips UV-C batten TMS160C 1x36W datasheet (PDF)
Before you order
- This is an open UV-C fitting for professional use. It must only be used as part of a system with adequate safeguards – for example door interlocks, timers, occupancy sensors, warning signage and trained operators.
- No person or animal should be in the room while the batten is operating.
- Hard-wired fitting – installation must be carried out by a licensed electrician.
- Need help with exposure times, lamp spacing or safety controls? Talk to us on 07 3705 5995 or email info@australianuv.com.au.
- Prefer a version with a built-in safety sensor? See our UV-C Linear Disinfection with Safety Sensor.
Warnings and safety
- DANGER: Risk Group 3 ultraviolet product. This fitting emits high-power UV-C radiation that can cause severe injury to skin and eyes. Avoid any eye and skin exposure to the operating lamp.
- Always isolate power before servicing or changing the lamp.
- The lamp contains a small amount of mercury. If a lamp breaks, ventilate the room for 30 minutes, collect the parts (preferably with gloves) into a sealed plastic bag and take them to a local recycling facility. Do not use a vacuum cleaner.
- Plants and materials exposed to UV-C for long periods may become damaged or discoloured.
Reviews
There are no reviews yet.