Description
Philips TUV PL-L 36W/4P – Compact UV-C Lamp
The Philips TUV PL-L 36W/4P is a compact, single-ended UV-C (germicidal) lamp used in professional air and water disinfection units. The twin-tube format delivers a useful UV-C output from a lamp only 415 mm long, and the single-ended 2G11 base makes lamp changes quick.
The lamp emits short-wave UV-C with a peak at 253.7 nm. A protective inside coating helps keep UV output close to constant across the useful life of the lamp, and the lamp glass filters out the 185 nm ozone-forming radiation.
Key features
- Genuine Philips (Signify) TUV PL-L lamp
- UV-C peak at 253.7 nm for disinfection applications
- Special glass filters out 185 nm ozone-forming radiation
- Protective coating for stable UV output over the lamp’s useful life
- Single-ended 2G11 4-pin base for easy replacement
- UV-C warning marking printed on the lamp
Typical applications
- Replacement lamp for UV-C air disinfection units, upper-air fixtures and HVAC equipment
- Water treatment, pond and aquarium UV clarifier units
- Enclosed surface disinfection equipment and cabinets
Specifications
| Product name | TUV PL-L 36W/4P |
| Cap-base | 2G11 (4 pins) |
| Lamp power | 36 W |
| Lamp voltage (nom) | 106 V |
| Lamp current (nom) | 0.435 A |
| UV-C radiation at 100 hr | 12 W (approx.) |
| Peak wavelength | 253.7 nm |
| Useful life (nom) | 9,000 hours |
| Depreciation at useful life | 20 % |
| Overall length (max) | 415 mm |
| Width (max) | 38 mm |
| Bulb | 2 x T16 |
| Mercury content (nom) | 4.4 mg |
| Net weight | 104 g |
Datasheet: Philips TUV PL-L product family datasheet (PDF)
Before you order
- Check the marking on your existing lamp reads TUV PL-L 36W/4P and that the base is a 4-pin 2G11.
- This lamp requires a compatible ballast. It is a replacement lamp only – ballast and lamp holder are not included.
- For consistent performance, replace UV-C lamps at the end of their rated useful life, even if they still light. Visible blue glow is not a measure of UV-C output.
- Not sure it is the right lamp? Talk to us on 07 3705 5995 or email info@australianuv.com.au.
Warnings and safety
- DANGER: Risk Group 3 ultraviolet product. These lamps emit high-power UV-C radiation that can cause severe injury to skin and eyes. Avoid eye and skin exposure to unshielded lamps. Use only in an enclosed environment or equipment that shields users from the radiation.
- Always isolate power before changing a lamp.
- Contains a small amount of mercury. If a lamp breaks, ventilate the room for 30 minutes, collect the parts (preferably with gloves) into a sealed plastic bag and take them to a local recycling facility. Do not use a vacuum cleaner.
- Plants and materials exposed to UV-C for long periods may become damaged or discoloured.
Reviews
There are no reviews yet.